1- & 2-Hr. Fire-Rated Bearing Wall Assemblies
Overview: 1- & 2-Hr Fire Rated Assemblies
2-Hr. Bearing Wall: Rated 2-Hr (Interior) & 1-Hr (Exterior)
Downloads: Revit || CAD || Submittal
2-Hr. Bearing Wall: Rated 2-Hr (Interior)
Downloads: Revit || CAD || Submittal
1-Hr. Exterior Bearing Wall: Rated 1-Hr (Interior) & 1-Hr (Exterior)
Downloads: Revit || CAD || Submittal
1-Hr. Exterior Bearing Wall: Rated 1-Hr (Interior)
Downloads: Revit || CAD || Submittal
FlameTech Interior FRTW Building Code Compliance & Life Safety Docs
Evaluation Report
Intertek Code Compliance Research Report (CCRR) – 1088
Los Angeles Research Report (LARR) #26119
FlameTech Interior FRTW One-Page Specification
FlameTech Interior FRTW Approved Manufacturers & Locations
Approved Manufacturing Locations (pg. 6)
Intertek Authorization to Mark (ATM)
FlameTech Safety Data Sheets
Understand Our Stamp
*Per Section 2303.2.4 of the International Building Code (2015), fire retardant treated lumber and wood structural panels shall be labeled. FlameTech Interior FRTW Lumber and Plywood is labeled after treatment and complies with applicable codes and standards. The label shall contain the following items: standards IAW with Sections 2303.2.5 through 2303.2.8.
- Identification mark of an approved agency in accordance with section 1703.5.
- Identification of treating manufacturer.
- The name of the fire-retardant treatment.
- The species of the wood treated.
- Flame spread and smoke-developed index.
- Method of drying after treatment.
- Conformance with appropriate s
Identification mark of an approved agency.
Identification of treating manufacturer.
Then name of the fire-retardant treatment.
The species of the wood treated. Note: FlameTech™ Fire Retardant has been approved for use on SYP & DF Plywood, and DF, SPF & SYP Dimension Lumber.
Flame spread and smoke-developed index.
Method of drying after treatment.
Conformance with appropriate standards IAW with 2303.2.5 and 2303.2.8
